The FumeFX Object Source lets the user build any geometry within their scene to be used as a component within their FumeFX simulation. In many cases, the objects selected within the Object Source gizmo are going to be the ignition source of the fire and smoke. Other times, they will be used to affect other fuel sources within the simulation.
To create an Object Source, go to the Create Command Panel, and from the Helpers menu, select FumeFX -> Object Src. Then click and drag in any 3ds Max viewport to create this Source. When done, you will be presented with a number of options, including which geometric object to use as part of the FumeFX simulation.
Note: Be aware that this source type only works with geometry. You cannot select particle systems with this source type, nor can you choose forces, other helpers or non-geometry types. NURBS, Patches and Polys are all acceptable.
This rollout contains the basic parameters for your object source. As mentioned before, all of its controls are available in both the Create/Modify Command Panel (by selecting the Object Source gizmo), as well as within the FumeFX UI floating dialog.
Active - You can turn this source on/off using this checkbox. You can also animate this checkbox.
Pick / Remove - When you create a FumeFX Object Source, the first thing you want to do is select the geometry that will become part of the simulation. Click on the Pick icon to choose an object. This basically links the geometry to the source icon, which will provide all of the parameters for the simulation.
Note: If you have objects that are grouped together in 3ds Max, when you use the Pick button it will select only one sub-component object from the group.
Free Flow - If you check this, source parameters will still influence channel values, but the source, itself, will behave just like fluid. As a result, the source???s velocity will not interrupt fluid movement in any way.
Type - The type chosen affects how the source volume is treated:
Volume fills the entire volume of the object.
Shell fills only the surface of the object.
Solid fills only the surface of the object; the interior is interpreted as a solid object, so nothing can pass through it.
Icon Size - Use this to modify the size of the icon ??? the object source???s symbolic representation in the viewport.
Map Channel - For textures used as masks, map channel can be selected.
Fuel, Oxygen, Temperature Smoke and Color Groups of Controls
Each of these channels has same set of parameters. These parameters work as a kind of mixing board, allowing you to balance and adjust the basic way in which different channels will affect your FumeFX simulation.
Type - Click the Set button to choose the type of affect that the source will have on that channel. When you click on it, you will get the following pop-up menu:
Channel is Disabled - The source won???t change that channel.
Add Values to the Voxel - The source adds values to voxel (v + value = amount).
Set Values in the Voxel - The source sets the voxel at a value (v = amount).
Amount - This is the amount that is set or added to each voxel.
Map - With this option, you can use a procedural 3D texture map as a mask for the value that is set. Click the Disabled button to enable/disable, or to choose Source from Red Channel, Source from Blue Channel, Source from Green Channel, or Source from Intensity as shown below. Once active, the map slot below this button will become active and ready for the user to select the map.
Object???s - Use the spinner to select a multiplier value for the object???s movement.
Normal ??? This is the velocity multiplier in the object???s face normal direction. It is possible to use a map to modulate the velocity???s value.
Map ??? Map allows users to use a procedural 3D texture map as a mask for the normal component of the emitted velocity. Click the Disabled button to enable/disable, or to choose Source from Red Channel, Source from Blue Channel, Source from Green Channel, or Source from Intensity as shown below. Once active, the map slot below this button will become active and ready for the user to select the map.
Source controller - To the right of the Velocity spinners is a button with a dash on it. This is where you can access the Source Controller options for the velocity parameters. Go to learn more about Source Controllers.
N-D Bias ??? This parameter defines the bias value between Normal velocity and Directional velocity. Value of 0 means that the contribution from Normal velocity will be 1.0 and contribution from Directional velocity will be 0.
Directional ??? The velocity calculated from the colors painted on the object by using the FFXVertexPaint modifier. This modifier allows user to paint velocities (stored in vertex colors) by using the brush strokes.
Map ??? Map uses a Vertex Color channel for the directional component of the emitted velocity. Red represents X direction, Green Y direction and Blue Z direction.
Note: Velocity parameters cannot have negative values.
Use these parameters to add irregularities to all source added values.
Amount - This sets the overall amount of irregularities on a scale from 0-1.
Scale - This value defines noise scale.
Frames - This value sets the speed of change per amount of Frames.